Tokyo Hy-Power RF Linear Amplifiers

Solid State RF Linear Amplifier Engineering  

  
 
HL-1.5Kfx
1.8 MHz ~ 28 MHz / 50 ~ 54 MHz AMPLIFIER
Detailed Views and Specifications
HL-1.5Kfx HF Amplifier

Features:
  • Small Footprint

  • Light weight- lightest 1kW amplifier in its class

  • Internal Power Supply

  • 2 Antenna Output Ports

  • 6 Meter Operation

  • Automatic band change when used with most modern transceivers… Icom, Kenwood and Yaesu

  • Wide line voltage operating range 100V-250V

  • Amplifier incorporates an advanced 16bit Microprocessor that controls all the functions of the amplifier, including the protection circuits

  • Lower cost in replacing finals compared to replacing tubes in tube-type amplifiers

  • When properly configured truly “ONE BUTTON OPERATION”. No tuning, waiting, or selecting bands…Just select a frequency and transmit!


Description:

The HL-1.5Kfx is our most popular amplifier. It is extremely compact and lightweight, having a small foot print, so it will not occupy much space in the operating station. In addition it is currently the only amplifier in the Tokyo Hy-Power amplifier line that is capable of operating both bands, taking full advantage of modern transceivers that have the ability of transmitting both on HF and 6M. The amplifier has a wide line voltage operating range. It can use 100V through 250V successfully. The amplifier transformer taps can be adjusted to fine tune the amplifier to the operator’s line voltage.

The amplifier incorporates four THP2933 RF Mosfets that are capable of supplying 1kW PEP HF and 750W PEP on 6 Meters. It also includes a built-in power supply and operates with line voltages of 100V-250V. The operating voltage of the amplifier can be fine tuned (via transformer tap settings) to the line voltage present at the operator’s station for maximum efficiency. The HL- 1.5Kfx is designed to integrate fully with the Tokyo Hy-Power HC-1.5KAT Automatic Antenna Tuner. The HL-1.5KAT Tuner band switching will auto-synchronize to the 1.5Kfx amplifier band setting (manual or automatic mode), following whatever band is selected on the amplifier. Most third party automatic tuners will also function properly, when used with the HL-1.5Kfx. Of course manual tuners can also be used, though band selection and antenna tuning must be done manually and carefully by the operator.

There is a front mounted meter. The meter’s function is selectable via the front mounted meter switch. It can display Power Reflected (Pr), Power Forward (Pf), Idle voltage to the MosFets (Vd), and Transmitting Current of the MosFets (Id). Additional front mounted controls are an automatic/manual rotary band switch to select the mode of band switching, automatic-via radio manufacturer or manual band switching via the up/down switches. There is also an antenna switch where the operator can select which antenna should be use for what band. In manual mode, the operator simply selects the correct antenna. In Auto Band switching mode, this function is automatically sets the correct antenna to a particular band. The amplifier will select the proper antenna A or B in auto-mode for each and every band the operator defines. Power On and STBY/Operate Switches complete the compliment of switches on the front panel.

There are numerous LED indicator mounted on the front panel. Power On, Stby/Operate, High Speed Fan Operation, High Current (Id). Warning lights include Over Drive, Overheat, Over Volt, Internal Fuse Open, and Excessive Reflective Power. A bank of LED's on the right side of the faceplate show which band is selected.

Rear controls include ALC adjustment control, Icom CIV sub-mini jack, Icom band voltage RCA jack, ICOM IV band voltage selector switch, DB-9 Kenwood Band data connector, Yaesu band data DIN Jack, HL-1.5KAT Tuner Interface DIN socket, Exciter (Radio) input, 2 antenna outputs, PTT keying line (STBY) RCA jack and a ALC RCA jack.

The amplifier is QSK capable (50wpm+) using miniature high speed Panasonic relays for T/R switching.
Specifications:
Frequency Band 1.8MHz ~ 28MHz, 50 ~ 54Mhz
(160m ~ 6m)
(All Amateur HF Bands plus 6M)
(Including WARC bands)
Operating Modes SSB / CW / RTTY
Typical RF Drive
(full output)
80W typical — 95W Max
Output Power 1kW Minimum SSB
900W CW / HF
650W 50-54MHz
Amplifier Class Class AB Push — Pull Circuit
RF Power Transistors ST Micro SD2933 x 4
Automatic
Band Switching
Most modern Icom, Kenwood, Yaesu, and Elecraft K3 Transceivers. (With optional K3 band data cable)
Power Requirement 100VAC-250VAC
50 / 60Hz —1900VA
Cooling Method Forced Air Cooling
T/R Switching Miniature High Speed Relays (Panasonic / 5-6 ms)
Size 10.7W x 5.6H x 14.3D
Weight 45.5 lbs

Open PDF File Manual

Home    |    Products    |    Prices    |     Manuals & Circuits    |    Factory Tour    |    News    |    About Us    |    Contact Us    |    Tech Support / FAQ
 
 
© 2013 Tokyo Hy-Power Labs, USA